A Complete Guide to Assessment Validation and Validating Assessments

A Complete Guide to Assessment Validation and Validating Assessments

Blog Article

RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.

Although we've written about validation many times, let’s redefine it. ASQA refers to validation as a quality review of the assessment process.

Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.

The SRTOs 2015 Clause 1.8 specifies that RTOs need to ensure compliance of their assessment systems, including RPL, with training package requirements, following the Principles of Assessment and Rules of Evidence.

The standards require RTOs to perform two types of validation.

The initial assessment validation ensures your RTO's assessments comply with the training package requirements.

The second validation type ensures that assessments adhere to the principles of assessment and rules of evidence.

Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.

Exploring the Two Types of Assessment Validation

Assessment Validation Unpacked

As discussed before and in previous blogs, validation includes two processes: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation or assessment tool validation focuses on the first part of the clause, ensuring that all unit requirements are met and that workbooks are entirely compliant.

Conversely, post-assessment validation pertains to the implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

This piece will highlight assessment tool validation.

Guidelines for Conducting Assessment Tool Validation

With a clear understanding of the two types of validation, let’s focus on assessment tool validation.

Optimal Timing for Assessment Tool Validation

The aim of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

This means that whenever new learning resources are acquired, you must perform assessment tool validation before student use.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

Still, this isn't the sole reason for conducting this type of validation. Conduct assessment tool validation when you:

- when resources are updated
- your scope includes new training products
- your course gets reviewed against training product updates
- identify your learning resources as a risk during your risk assessment

The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.

What Training Products Should Be Validated?

Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.

Essential Resources for Assessment Tool Validation

Teaching Materials

To validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – this is the initial document to review. It identifies which assessment items address unit requirements, speeding up validation.

Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Assessment Validation Panel

Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.

As a whole, your validation panel must have:

Current vocational competencies and relevant industry skills for the unit being validated

Up-to-date knowledge and skills in vocational teaching and learning

Any one of these training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the next version

Validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also serves as evidence that you have validated your resources before students use them.

ASQA does not provide a specific template for assessment tool validation, but numerous templates can be found online. These tools often have validators look at the tools as a whole to verify if they meet the principles of assessment.

Principles of Assessment Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.

We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?

As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.

Assessment Basic Principles
Fairness – Are equal opportunities and access offered to everyone in the assessment process?

Flexibility – Are different options provided in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Evidence Key Rules

Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool prove that the work is the candidate’s own?

Currency – Are the assessment tools aligned with current units of competency and contemporary industry practices?

Despite these being frequently addressed in VET professional development and nationally recognised training, heaps of tools still have problems with these requirements.

To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:

Show What You Mean

Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

diaper changing

prepare bottle, bottle feed babies and clean equipment

prepare solid foods and feed infants

appropriately respond to baby signs and cues

prepare babies for sleep and settle them

monitor and promote age-appropriate physical exploration and gross motor skills

Having students describe changing nappies for babies under 12 months doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

All Requirements or Not Competent

Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity

Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What sort of information can be included in a work package?

The answer may include:

Needed materials

Corresponding costs

Duration of activities

Appointed duties and responsibilities

When an assessment item calls for multiple answers, indicate the number of answers a student needs to provide. This way, your assessment is reliable, and the evidence gathered is valid.

The same applies to assessment items with double-barrelled questions or those asking check here for multiple answers simultaneously. These can confuse both students and assessors, as shown in the sample question below:

Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.

Possible answers can include, but are not limited to:

Weather conditions – work area isolation, engineering controls, PPE

Work area and ground conditions – eliminating hazards, isolating, engineering controls

People – isolation, engineering controls, administrative controls

Structural hazards – substitution, isolating, engineering controls

Chemical hazards – isolation, engineering, administrative controls

Equipment or machinery – isolating, use of engineering controls, administrative controls

Steering clear of double-barrelled questions makes it easier for students to respond and for assessors to judge student competence accurately.

Seeing these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees mean you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s wiser to take a safe and compliant approach.